Lq Battery Pack Lipo4 51.2V 100Ah Can Bms W/Mount

LinkQnet LiFePO4 51.2V 100Ah Wallmount Battery Pack with CAN BMS High Density Solution: The battery pack is expertly constructed from premium materials and complies with all major safety and performance specifications. The core cell storage consists of sixteen new Lithium-Ion Phosphate (LFP) prismatic cells manufactured by Hefei Guoxuan Hi-Tech Power Energy Co., Ltd. Guoxuan are the manufacturers of choice for leading German EV brands and well as many other electric vehicle manufacturers. Innovative Battery Management System: The BMS has been designed with the experience of over ten years of battery management involvement. It uses internationally sourced components to ensure consistency, performance and reliability. The firmware is interactively developed and robust. The flexibility of both CAN bus and RS485 communications allows for a wide range of applications. The LCD display allows a clear overview of the battery state of charge and condition without the need for interfacing to a computer. SPECIFICATIONS: BASIC PARAMETERS Rated Voltage 51.2 Volts Rated Capacity 100 Amp Hours Rated Energy 5120 Watt Hours Rating 1C OPERATING PARAMETERS Operating Voltage Range 44.8 Volts – 56.0 Volts Charge Voltage Range 55.2 Volts – 56.0 Volts (Typical Inverter Bulk/Float Charge can be set to 55.3V) Cut-Off Voltage 44.8 Volts (Typical Inverter Cut Off can be set to 46.0V) Recommended Charge Current 50 Amps Maximum Charge Current 100 Amps Maximum Discharge Current 100 Amps PHYSICAL PARAMETERS Dimensions 400mm (D) x 550mm (W) x 160mm (H) – Optimized for wall mounting Weight 49kg Communication Ports RS485 (For programming) , CAN bus, 2x Inverter Battery-Comm / Stacking Ports Display LED and LCD with cursor keys for BMS Status and State of Charge Output Terminal 2 x Red Amphenol SurLok Positive, 2 x Black Amphenol SurLok Negative Output Protection Internal Electronic Circuit Disconnecter ENVIRONMENTAL Humidity 5% – 95% Relative Humidity Charge Temperature Range 0°C to 45°C Discharge Temperature Range -20°C to 60°C Storage Temperature Range -20°C to 45°C SERVICE LIFE Cycle Life More than 6000 Cycles at 50 Amp Discharge Rate and 80% Depth of Discharge Hardware Design Life Fifteen Years Warranty Five Years, based on the terms and conditions of the warranty policy CERTIFICATION Safety CE, EMC, TUV (IEC62619), UL1973 Transportation UN38.3 INSTALLATION Inverter Integration to BMS Requires customized cable for each specific inverter brand, refer to manual Inverter Integration without BMS Will emulate Lead Acid battery, can be optimized by altering inverter parameters BMS base protocol compatibility Voltronic “LIb” BMS protocol / Optional Pylontech BMS protocol Addressable Parallel Stacking Battery packs can be paralleled up to sixteen addressable units per solution Installation Competency Not consumer installable. Needs to be wired into inverter/UPS by a qualified electrical contractor with appropriate experience.